under construction: UNDER CONSTRUCTION Tape Cross Stock Photo


Commercial, Industrial, and Utility Grounding System Design


This course is co-sponsored by I.E.E.E. ( The Institute of Electrical and Electronics Engineers, Inc.) with discounts available for I.E.E.E. members.

This course will cover general and detailed principles used for the design of power system and equipment in systems from 120V up to transmission line systems. It is structured to cover all areas of concern for practicing industrial, commercial, and utility engineers. Most courses on this topic address only the "how" but omit the "why". Consequently engineers do not have the requisite knowledge to know how to handle unique situations and how to correctly utilize lighting and surge protection equipment.

This course will draw into the curriculum, design and theoretical principles, published within national standards and decades of I.E.E.E. papers written on the subject. It will also be focused on the information the instructor has needed during his professional career as a designer, consultant, and instructor.

Instructor: Charles Pratt, P.E.

  • Practicing professional engineer since 1971.
  • Life member of various I.E.E.E. power, industry, and EMC societies
  • Member of the Lightning Protection Institute.
  • Instructor for Army Corps of Engineers in the technical areas of power, surge protection, and lightning protection grounding system design

Why is this course unique?

  • Covers commercial, industrial, and utility systems and protection from effects of ground faults that can present adverse shock hazards to humans.
  • Taught by an instructor with decades of experience ferretting out fact from fiction and "sales pitches" from lightning protection and grounding equipment manufacturers
  • Provides students with theory and lab demonstrations to support the theory
  • 8+ hours are dedicated to sample calculations and designs in specific areas submitted by the students or as selected by the instructor.
  • Covers the electrical theory, system analysis, and physics which form the basis for grounding system design. Answers many of the "Whys".
  • Grounding electrode and array performance under normal power system frequencies and fast transients .
  • Grounding of systems and equipment for compliance with the National Electrical Code.
  • Will remove most of the "mystique" and "black magic" commonly associated with grounding for safety,lightning, and surge protection
  • Class sizes are kept small to optimize your personal learning experience
  • Grounding system testing will also be covered.
  • Hands-on experience in seeing actual waveforms and performances of conductors during lab exercises.
  • Design "rule-of-thumb" tips provided to minimize system redesign
  • Information exceeds that of any other similar course on the market

Course Structure

The depth of the material is geared for graduate electricalgsafd study engineers or electrical designer technicians. Standards such as the NEC, IEEE 80, and other important standards are addressed.

During short lab exercises, students will be able to see demonstrations of component performance during actual surges and power system ground faults.. A surge generator capable of 6-kV transient impulses will be used during some of these demonstrations along with various grounding electrode arrays and grids.

Course Materials

The student will receive an extensive workbook that exceeds the quality of training manuals of most courses of this type. Each workbook page contains a single lecture slide and appropriate comments by the instructor designed to minimize note taking by the student and to provide a more useful future reference.

The book "Industrial Power System Grounding Design Handbook" by Dunki-Jacobs, F. Shields, and Conrad St. Pierre is used for reference in the course and is included in the course materials provided. These authors were life long I.E.E.E. contributors to this topic and the related industry standards.

Lastly, each attendee will receive a CDROM that captures all of the audio and projections of the lecture covering the last day during the sample problem sessions. These sessions will be designed to work through actual design challenges.

General Daily Schedule

Monday-Wednesday: 8AM to 5PM lecture and lab demonstrations

Thursday: 8AM to 5PM sample problems and computations


Continuing Education Credits

2.2 to 3.0 CEU's (22-30 PDHs) will be provided for through the I.E.E.E. Education Program  for those students needing professional continuing education credits. Actual credits depend on final course length.

Price:  $2,200.00 (US)

(There is a 10% discount available for I.E.E.E. members registering at any time in addition to any other discounts offered. See registration form for early registration and other discounts. )

Dates and Locations

Participant slots are limited to 12 to maximize student involvement.



Dates Pending

Location: Tulsa, OK

If you will be interested in this course, please contact us with an email or by phone and let us know about your needs and topics of specific interest. This will assist us in the course development and optimization.


The course runs from 8 AM Monday through 5 PM Thursday. It is important that students not book travel on Thursday or they will miss some of the most important sessions of the week. Due to the large amount of equipment needed during the lab demonstrations, this course will most likely not be offered in other sites.


IEEE CEU's: IEEE Continuing Education Programs are peer-reviewed by content experts. This peer review guarantees both quality of the technical content of learning materials, as well as adherence to IEEE’s strict criteria for educational excellence. All programs that pass this strict process are entitled to award IEEE Continuing Education Units (CEUs), recognized as the standard of excellence for continuing education programs in IEEE’s fields of interest.


       contents © 2018 Quadrelec Engineering Corp.